Death Star - UCS
Thanks to Roken, Matt.in.Alba, Paul Higgins, Graham, Stephanie Smith, Nicholas Gruendl, Callum, Skogbit, Twipped, Paulquicode, Enchanted Bricks, Kara, Anthony Harper for helping identify parts
Bag inventory
1
Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side
Brick, Round 1 x 1
Hips and Legs with SW Death Star Droid Pattern
Hips and Legs with SW Sith Robe Pattern (Darth Vader)
Hose, Rigid 3mm D. 14L / 11.2cm
Minifigure Cape Cloth, Standard - Spongy Stretchable Fabric - 3.9cm Height
Minifigure Neck Collar SW Darth Vader Helmet Lower Jaw
Minifigure, Head, Modified SW RA-7 Series Protocol Droid, Plain
Minifigure, Headgear Cap, SW Imperial Officer with Silver Code Disk Pattern
Minifigure, Headgear Helmet SW Darth Vader - Two Piece, Top
Minifigure, Utensil Loudhailer / Megaphone / SW Blaster
Panel 1 x 1 x 1 Corner
Panel 1 x 2 x 1 with Rounded Corners
Plate 2 x 4
Plate 2 x 8
Plate, Modified 1 x 2 with Clip with Center Cut on Top
Plate, Modified 1 x 2 with Door Rail
Plate, Round 4 x 4 with Hole
Slope, Inverted 45 4 x 2 Double with 2 x 2 Cutout
Slope, Inverted 45 6 x 1 Double with 1 x 4 Cutout
Technic, Brick 1 x 2 with Axle Hole
Technic, Pin with Short Friction Ridges
Technic, Plate 2 x 6 with 5 Holes
Tile, Modified 2 x 2 Inverted
Torso SW Darth Vader Imperial Star Destroyer Pattern / Black Arms / Black Hands
Torso SW Death Star Droid Pattern / Black Arms / Black Hands
Wedge 4 x 4 Triple Inverted with Connections between 4 Studs
Wedge, Plate 2 x 2 Left
Wedge, Plate 2 x 2 Right
Wedge, Plate 3 x 3 Cut Corner
Wedge, Plate 3 x 4 with Stud Notches
Wheel Skateboard / Trolley
Brick, Round 1 x 1
Brick, Round 2 x 2 x 2 Robot Body with Dark Blue Lines and Silver Pattern (Imperial Astromech)
Leg Mechanical, Astromech Droid with Technic Pin
Plate 2 x 4
Technic, Axle 1L with Pin with Friction Ridges
Bracket 1 x 2 - 2 x 2
Brick 1 x 2
Hinge Brick 1 x 2 Base
Plate 1 x 2
Plate 1 x 3
Plate 1 x 4
Plate 2 x 3
Plate 4 x 4 Corner
Plate 4 x 8
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Plate, Modified 1 x 2 with Pin Hole on Top
Plate, Modified 1 x 4 Offset
Plate, Round 2 x 2 with Axle Hole
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Plate, Round Corner 4 x 4
Slope 30 1 x 2 x 2/3
Slope 45 2 x 1
Slope, Inverted 45 2 x 1
Technic, Liftarm Thin 1 x 4 - Axle Holes
Tile, Modified 1 x 2 Grille with Bottom Groove
Wedge, Plate 3 x 3 Cut Corner
Brick, Modified 1 x 1 with Headlight
Brick, Round 1 x 1
Technic, Axle 3L with Stud
Brick 2 x 2
Brick 2 x 3
Brick 2 x 4
Hinge Brick 2 x 2 Top Plate
Hinge Plate 1 x 2 Locking with 2 Fingers on Side
Hinge Plate 1 x 4 Locking Dual 1 Finger on Side
Hinge Plate 2 x 4 with Pin Hole and 3 Holes - Top
Hinge Plate 3 x 4 Locking Dual 2 Fingers
Hips and Legs Plain
Panel 1 x 2 x 2 with Side Supports - Hollow Studs
Plate 1 x 1
Plate 1 x 10
Plate 1 x 6
Plate 1 x 8
Plate 2 x 2
Plate 2 x 2 Corner
Plate 2 x 3
Plate 2 x 4
Plate 2 x 8
Plate 4 x 10
Plate 4 x 8
Plate, Modified 1 x 2 with Bar Handle on End
Plate, Round 2 x 2 Thin with Wheel Holder
Slope 30 1 x 1 x 2/3
Slope 33 3 x 1
Slope 45 2 x 1
Tile 1 x 1 with White and Red Gauge, Black Thick Needle and Screw Heads Pattern
Tile, Round 2 x 2 with Bottom Stud Holder
Torso SW Imperial Officer 13 Pattern / Light Bluish Gray Arms / Black Hands
Wedge 2 x 2 (Slope 45 Corner)
Wedge, Plate 2 x 4
Wedge, Plate 8 x 3 Pentagonal Left
Wedge, Plate 8 x 3 Pentagonal Right
Minifigure, Head Male Brown Eyebrows and Long Sideburns, Frown and Furrowed Brow Pattern (SW Imperial Officer)
Minifigure, Weapon Lightsaber Hilt Straight
Brick, Modified 1 x 1 with Stud on Side
Brick, Round 2 x 2 with Axle Hole
Plate 1 x 2
Tile, Round 2 x 2 with Bottom Stud Holder
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Brick, Round 2 x 2 Dome Top with Blue Pattern (Imperial Astromech)
Dish 4 x 4 Inverted (Radar) with Solid Stud with Radial Jedi Starfighter / TIE Cockpit Pattern
Plate, Round 1 x 1
Bar 4L (Lightsaber Blade / Wand)
Plate, Round 1 x 1
Minifigure, Head Light Nougat Sunken Eyes, Wrinkles, Scar, 2 Large Scars on Back Pattern (SW Darth Vader)
Technic, Brick 1 x 1 with Hole
Frequently asked questions
-
This bag inventory was built by following the official LEGO building instructions step by step. At every step, we recorded which pieces were used and which numbered bag they came from, resulting in a complete parts list per bag.
-
Each numbered bag contains a specific subset of the set's total parts. By selecting a bag above, you can see every piece it includes — with part images, color details, and exact quantities.
-
Click on a bag, then use the export buttons in the toolbar. You can download a PDF for easy reference, or a BSX file — a BrickLink-compatible XML format you can import into tools like BrickStore.
-
We use bag 0 to list all parts that are outside of numbered bags, such as sticker sheets or some larger parts that are often not in any bag but directly in the box.
-
Since inventories are built by hand, mistakes can happen. If you spot anything wrong, please contact us so we can review and correct it.
Report an issue
Let us know what seems wrong with this bag inventory.
PDF format
Choose a layout for your PDF export.
Generating PDF
The inventory PDF for this bag is being generated. This may take a few seconds.