Flatbed Truck with Helicopter
Set inventory
This set does not have numbered bags in the building instructions. The full set inventory is shown below without a per-bag split.
All bags
Bracket 5 x 2 x 1 1/3 with 2 Holes and Bottom Tube
Brick 1 x 4
Brick, Modified 1 x 1 with Studs on 2 Sides, Adjacent
Plate 1 x 1
Plate 1 x 2
Plate 1 x 5
Plate 2 x 12
Plate 2 x 2 Corner
Plate 2 x 4
Plate 4 x 4
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Plate, Modified 2 x 2 with Wheels Holder
Propeller 3 Blade Small
Propeller 4 Blade 5 Diameter with Rounded Ends and Closed Hub
Slope 30 1 x 1 x 2/3
Slope 30 1 x 2 x 2/3
Slope, Curved 2 x 1 x 2/3
Slope, Curved 2 x 4 x 2/3 with Bottom Tubes
Slope, Curved 4 x 1 x 2/3 Double
Slope, Inverted 45 4 x 2 Double with 2 x 2 Cutout
Tile 1 x 1
Tile 1 x 3
Tile 1 x 4
Tile 1 x 8
Tile 2 x 4
Tile, Modified Facet 2 x 2
Tire 14mm D. x 6mm Solid Smooth
Tire 21 x 9.9
Vehicle, Mudguard 4 x 2 1/2 x 1 with Arch Round
Arm Mechanical, Exo-Force / Bionicle, Thick Support
Brick, Modified 1 x 1 with Stud on Side
Plate 1 x 2
Plate 2 x 3
Plate 2 x 6
Plate, Modified 1 x 2 with Door Rail
Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides
Technic, Brick 1 x 2 with Holes
Technic, Pin 1/2 with Friction Ridges
Tile, Round 2 x 2 with Hole
Wedge, Plate 3 x 6 Cut Corners
Bar 1L with 1 x 1 Round Plate with Hollow Stud
Bar 1L with Angled Hollow Stud
Bar 6L with Stop Ring
Bar Holder with Handle
Bracket 1 x 2 - 1 x 4 with Rounded Corners at the Bottom
Brick, Modified 1 x 2 x 1 2/3 with Studs on Side
Panel 1 x 2 x 3 with Side Supports - Hollow Studs
Plate 1 x 1
Plate 2 x 10
Plate 2 x 14
Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Plate, Modified 1 x 2 with Door Rail
Plate, Modified 1 x 2 with Wheel Holder, Reinforced Underside
Plate, Modified 2 x 2 with Pin Holes
Plate, Round 1 x 1
Plate, Round 1 x 2 with Open Studs
Plate, Round 1 x 3 with Open Studs
Pneumatic T Piece Second Version (T Bar with Ball in Center)
Slope, Curved 1 x 4 x 2/3 Double
Slope, Curved 2 x 1 x 2/3
Slope, Curved 2 x 2 x 2/3
Technic, Brick 1 x 1 with Hole
Technic, Plate 2 x 8 with 7 Holes
Tile 1 x 1
Tile 1 x 2
Tile, Modified 2 x 2 with Pin
Tile, Modified 2 x 2 with Studs on Edge
Tile, Modified Facet 2 x 2
Vehicle, Exhaust Pipe with Technic Pin, Flat End with Squared Pin Hole
Wheel 11mm D. x 6mm with 8 Spokes
Wheel 14mm D. x 9.9mm with Center Groove, Fake Bolts and 6 Double Spokes
Brick 1 x 3
Brick, Modified 1 x 1 x 1 2/3 with Studs on Side
Plate 1 x 3
Plate 1 x 4
Plate, Modified 1 x 3 with 2 Studs (Double Jumper)
Slope 30 1 x 1 x 2/3
Slope 45 2 x 1
Slope, Curved 2 x 1 x 2/3
Tile 1 x 3
Wedge, Plate 2 x 2 Cut Corner
Tile, Modified 1 x 2 Grille with Bottom Groove
Bracket 1 x 2 - 1 x 2 Inverted
Brick 2 x 4
Plate 1 x 2
Plate 1 x 3
Plate 1 x 4
Plate 1 x 8
Plate 2 x 3
Plate 2 x 4
Plate 3 x 3
Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Hollow Bottom Tube
Slope 30 1 x 1 x 2/3
Slope, Curved 2 x 1 x 2/3
Tile 1 x 2
Tile 1 x 3
Tile, Round 1 x 1 Quarter
Wedge 2 x 1 x 2/3 Left
Wedge 2 x 1 x 2/3 Right
Wedge, Plate 2 x 2 Cut Corner
Bracket 1 x 2 - 1 x 2
Plate 2 x 2
Brick 1 x 2 without Bottom Tube
Brick 2 x 2
Plate 1 x 1
Plate, Round 1 x 1
Slope 45 2 x 1
Bar with Light Cover (Bulb) / Bionicle Barraki Eye
Tile 1 x 1
Bracket 2 x 2 - 1 x 2 Centered
Brick 1 x 4
Plate 1 x 1
Plate 1 x 2
Plate 1 x 3
Plate 1 x 8
Plate 3 x 3
Slope, Curved 2 x 1 x 2/3 Inverted
Slope, Inverted 33 3 x 1
Tile 1 x 2
Frequently asked questions
-
This bag inventory was built by following the official LEGO building instructions step by step. At every step, we recorded which pieces were used and which numbered bag they came from, resulting in a complete parts list per bag.
-
Each numbered bag contains a specific subset of the set's total parts. By selecting a bag above, you can see every piece it includes — with part images, color details, and exact quantities.
-
Click on a bag, then use the export buttons in the toolbar. You can download a PDF for easy reference, or a BSX file — a BrickLink-compatible XML format you can import into tools like BrickStore.
-
We use bag 0 to list all parts that are outside of numbered bags, such as sticker sheets or some larger parts that are often not in any bag but directly in the box.
-
Since inventories are built by hand, mistakes can happen. If you spot anything wrong, please contact us so we can review and correct it.
Report an issue
Let us know what seems wrong with this bag inventory.
PDF format
Choose a layout for your PDF export.
Generating PDF
The inventory PDF for this bag is being generated. This may take a few seconds.