Pirate Roller Coaster
Set inventory
This set does not have numbered bags in the building instructions. The full set inventory is shown below without a per-bag split.
All bags
Bar 1 x 4 x 2
Bar 1.2L with Top Stud and 4 Bar Arms Up (Palm Tree Top)
Bar 7 x 3 with 2 U Clips (Ladder)
Bar Holder with Handle
Bracket 1 x 2 - 1 x 2
Dish 2 x 2 Inverted (Radar)
Fence 4 x 4 x 2 Quarter Round Spindled with 3 Studs
Flag 2 x 2 Trapezoid with Flat Edge
Flag 4 x 1 Wave Right
Hinge Plate 1 x 2 Locking with 2 Fingers on Side
Minifigure, Utensil Camera Handheld Style with Extended Bar Handle
Plate 1 x 12
Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
Plate, Modified 1 x 2 with Clip with Center Cut on Top
Plate, Modified 1 x 3 with 2 Studs (Double Jumper)
Plate, Modified 2 x 2 with Tow Ball Socket, Short, Flattened with Holes and Axle Hole in Center
Propeller 3 Blade 5 Diameter
Technic, Axle 8L
Technic, Axle 12L
Technic, Axle Connector with Axle Hole
Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Technic, Pin Connector Round with 4 Clips (Horizontal Grip)
Technic, Pin with Short Friction Ridges
Technic, Plate 2 x 4 with 3 Holes
Train Wheel Small, Hole Notched for Wheels Holder Pin
Vehicle, Steering Wheel Small, 2 Studs Diameter
Antenna Small Base with Black Lever (4592 / 4593)
Brick, Round 1 x 1
Flag 4 x 1 Wave Right
Plate, Modified 1 x 1 with Tooth Horizontal
Tap 1 x 1 without Hole in Nozzle End
Torso Pirate Vest Open with Gold Buttons over Shirt with Red and White Horizontal Stripes, Yellow Neck Pattern / Yellow Arms / Yellow Hands
Plant Sea Grass / Seaweed
Plate, Round 1 x 1
Torso Female Top with Dark Pink Stripes and Flower Necklace Pattern / Yellow Arms / Yellow Hands
Brick, Round 2 x 2 with Axle Hole
Torso Hoodie with Zipper over Lime and Green Striped Shirt Pattern / Dark Azure Arms / Yellow Hands
Brick 1 x 2
Hips and Legs Plain
Plate 1 x 2
Plate 1 x 4
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Slope 30 1 x 1 x 2/3
Slope 30 1 x 2 x 2/3
Slope 45 2 x 1
Slope, Curved 2 x 1 x 2/3
Slope, Curved 2 x 2 x 2/3
Tile 2 x 2
Wedge, Plate 4 x 4
Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side
Brick, Modified 1 x 2 with Log Profile
Brick, Round 2 x 2 with Axle Hole
Minifigure, Weapon Sword, Cutlass / Saber with Small Hilt
Plate 1 x 2
Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
Plate, Modified 1 x 2 with Tow Ball on Side
Plate, Round 1 x 1
Plate, Round 4 x 4 with Hole
Slope 18 4 x 1
Slope 45 2 x 1
Slope 45 2 x 2
Slope 65 2 x 2 x 2 with Bottom Tube
Slope 75 2 x 1 x 3 - Hollow Stud
Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides
Slope, Inverted 45 2 x 1
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Technic, Steering Arm with 3 Tow Ball, Compact
Tile, Modified 2 x 2 with Pin
Wheel Roller Coaster
Arch 1 x 4
Brick, Round 1 x 1
Minifigure, Hair Swept Left Tousled with Slight Widow's Peak and Short Sideburns
Slope 65 2 x 1 x 2
Minifigure, Headgear Cap - Short Curved Bill with Seams and Hole on Top
Minifigure, Hair Female Short Swept Sideways
Hips and Legs Plain
Brick, Modified 1 x 2 with Masonry Profile
Hips and Legs Plain
Plate 1 x 4
Plate 2 x 3
Plate 2 x 6
Plate, Round Half 3 x 6 with 1 x 2 Cutout
Arch 1 x 3 x 2 Curved Top
Brick 2 x 3
Legs Short
Plate, Round 2 x 2 with Axle Hole
Slope 30 1 x 1 x 2/3
Slope, Curved 2 x 1 x 2/3
Arch 1 x 4 x 2
Bar 3L (Bar Arrow)
Bar 1 x 3 with Clip and Stud Holder (Robot Arm)
Bracket 1 x 2 - 1 x 2 Inverted
Bracket 5 x 2 x 1 1/3 with 2 Holes and Bottom Tube
Brick 1 x 1
Brick 1 x 4
Brick 2 x 4
Brick 2 x 8
Hinge Brick 1 x 4 Swivel Base
Hinge Brick 1 x 4 Swivel Top
Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole on Ends with Slots
Plate 1 x 10
Plate 2 x 10
Plate 2 x 2
Plate 2 x 4
Plate 4 x 10
Plate 4 x 6
Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)
Plate, Modified 1 x 2 with Bar Handles on Ends
Plate, Modified 1 x 2 with Small Tow Ball Socket on End
Plate, Modified 1 x 2 with Small Tow Ball Socket on Side
Plate, Modified 2 x 2 with Pin on Bottom
Plate, Modified 2 x 2 with Wheels Holder
Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Solid Bottom Tube
Plate, Round 6 x 6 with Hole
Slope 18 4 x 2
Slope 75 2 x 2 x 3 - Solid Studs
Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs
Slope, Inverted 75 2 x 1 x 3
Technic Bush 1/2 Smooth
Technic, Axle 3L
Technic, Axle 5L
Technic, Brick 1 x 2 with Axle Hole
Technic, Pin 1/2 without Friction Ridges
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Technic, Plate 2 x 6 with 5 Holes
Tile 1 x 6
Tile 2 x 2
Tile, Modified 1 x 2 Grille with Bottom Groove
Train, Track Roller Coaster Curve, 90 degrees
Train, Track Roller Coaster Ramp Large Lower Part, 6 Bricks Elevation
Train, Track Roller Coaster Ramp Large Upper Part, 6 Bricks Elevation
Train, Track Roller Coaster Ramp Small, 3 Bricks Elevation
Wedge 3 x 2 Left
Brick, Round 2 x 2 Dome Bottom
Brick, Round 2 x 2 Dome Top
Plate 1 x 6
Plate 2 x 4
Plate, Round Corner 6 x 6
Slope, Curved 2 x 2 x 2/3
Technic, Liftarm Thick 1 x 2 - Axle Hole
Tile 2 x 2
Container, Barrel Half Large with Axle Hole
Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)
Brick and Axle Separator
Cone 1 x 1 with Top Groove
Fish
Plate 1 x 2
Plate 2 x 2
Plate 2 x 4
Slope, Curved 2 x 1 x 2/3
Slope, Curved 2 x 2 x 2/3
Tile 1 x 2
Door 1 x 4 x 6 Barred with Stud Handle
Projectile Launcher, Cannon Shooting
Minifigure, Utensil Goblet
Pane for Window 1 x 2 x 2 2/3 Lattice Diamond with Rounded Top
Plate, Round 1 x 1
Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite
Brick, Round 2 x 2 Dome Bottom
Brick, Round 2 x 2 Dome Top
Crab
Minifigure, Headgear Hat, Cloth Wrap / Bandana with Double Tail in Back, Many Folds
Plate 2 x 4
Projectile Launcher Part, Cannon Base 2 x 4
Slope, Curved 2 x 1 x 2/3
Technic, Axle 2L Notched
Wedge, Plate 4 x 2 Right
Antenna 4H - Flat Top
Arch 1 x 3 x 3
Arch 1 x 5 x 4 - Continuous Bow
Arch 1 x 6 Raised Arch
Bar 4L (Lightsaber Blade / Wand)
Bar 6L with Stop Ring
Brick 2 x 4
Brick, Modified 1 x 2 with Log Profile
Brick, Round 2 x 2 with Axle Hole
Container, Box 2 x 2 x 2 - Top Opening
Dinosaur Tail / Neck Middle Section with Bar Hole and Technic Pin
Plate 1 x 4
Plate 1 x 6
Plate 2 x 10
Plate 2 x 2
Plate 2 x 4
Plate 4 x 6
Plate, Modified 1 x 2 with Pin Hole on Top
Plate, Round 1 x 1 with Bar Handle
Slope, Curved 2 x 2 x 2/3
Slope, Curved 4 x 1
Slope, Curved 4 x 1 x 2/3 Double
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Slope, Inverted 75 2 x 1 x 3
Technic, Axle and Pin Connector Angled #3 - 157.5 degrees
Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
Technic, Axle Connector Hub with 4 Bars and Pin Hole
Wedge, Plate 10 x 10 Cut Corner with no Studs in Center
Window 1 x 2 x 2 2/3 with Rounded Top
Slope, Inverted 45 2 x 1
Vehicle, Base 4 x 5 Roller Coaster Car
Brick 2 x 4
Brick 2 x 6
Brick, Modified 1 x 1 with Studs on 2 Sides, Adjacent
Plate 1 x 8
Plate 2 x 16
Plate 2 x 4
Plate 2 x 6
Plate 8 x 16
Plate 8 x 8
Plate, Round 2 x 2 with Axle Hole
Plate, Round Corner 4 x 4
Tile, Modified 1 x 2 with Bar Handle
Panel 1 x 2 x 1 with Rounded Corners
Tile, Round 1 x 1
Rock 1 x 1 Crystal 5 Point
Minifigure, Utensil Bottle
Plate, Round 1 x 1
Brick, Round 1 x 1
Wave Rounded Straight Large with Bar End (Flame) with Marbled Trans-Clear Pattern
Plate, Round 1 x 1
Brick, Round 1 x 1
Arch 1 x 4
Arch 1 x 8 x 2 Raised
Arm Skeleton, Bent with Clips at 90 degrees (Vertical Grip)
Bar 6L with Stop Ring
Brick 1 x 1
Brick 1 x 2
Brick 1 x 3
Brick 1 x 4
Brick 2 x 2 Corner
Brick, Modified 1 x 2 with Log Profile
Brick, Round 1 x 1
Door, Frame 1 x 4 x 6 with 2 Holes on Top and Bottom
Fence 1 x 4 x 1 Lattice
Leg Skeleton
Minifigure, Head with Black Standard Skull Pattern
Minifigure, Utensil Flotation Ring (Life Preserver)
Plate 1 x 1
Plate 1 x 2
Plate 1 x 4
Plate, Modified 1 x 2 with 3 Teeth
Plate, Round 1 x 1
Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)
Slope 45 2 x 1
Slope, Curved 3 x 1
Slope, Inverted 45 2 x 1
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Slope, Inverted 45 6 x 1 Double with 1 x 4 Cutout
Technic, Brick 1 x 1 with Hole
Tile 1 x 2 with 'TICKET' and '0937' Pattern
Tile 1 x 4 with Red and White Danger Stripes (Red Corners) Pattern
Tile 2 x 3
Tile, Modified 1 x 1 with Open O Clip
Tile, Round 1 x 1 with Black Eye Partially Closed with Off-Center Pupil Pattern
Torso Basketball Jersey Tank Top with '39' and Orange and Red Diamonds, Yellow Neck and Shoulders, Back Print Pattern / Yellow Arms / Yellow Hands
Torso Skeleton, Rounded Rib Cage and Thick Shoulder Pins
Wedge, Plate 4 x 2 Left
Bracket 1 x 2 - 1 x 4 with Rounded Corners
Brick 1 x 2
Brick 1 x 4
Brick 1 x 6
Brick 2 x 2 Corner
Brick, Modified 1 x 1 with Stud on Side
Brick, Round 1 x 1
Minifigure, Head Beard Dark Orange, Gold Teeth, Eye Patch Pattern
Minifigure, Head Child Brown Eyebrows, Raised Left Eyebrow, Freckles, White Pupils, Crooked Smile Pattern
Minifigure, Head Dual Sided Black Eyebrows, Medium Nougat Chin Dimple, Lopsided Grin / Scared Open Mouth with Teeth Pattern
Minifigure, Head Dual Sided Female Black Eyebrows, Double Eyelashes, Nougat Lips and Freckles, Open Mouth Smile with Top Teeth and Red Tongue / Sleeping Pattern
Plate 1 x 4
Plate, Modified 1 x 1 with Tooth Vertical
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
Plate, Round 1 x 1 with Open Stud
Slope 30 1 x 2 x 2/3
Slope, Inverted 45 2 x 1
Tap 1 x 1 without Hole in Nozzle End
Technic, Axle 7L
Frequently asked questions
-
This bag inventory was built by following the official LEGO building instructions step by step. At every step, we recorded which pieces were used and which numbered bag they came from, resulting in a complete parts list per bag.
-
Each numbered bag contains a specific subset of the set's total parts. By selecting a bag above, you can see every piece it includes — with part images, color details, and exact quantities.
-
Click on a bag, then use the export buttons in the toolbar. You can download a PDF for easy reference, or a BSX file — a BrickLink-compatible XML format you can import into tools like BrickStore.
-
We use bag 0 to list all parts that are outside of numbered bags, such as sticker sheets or some larger parts that are often not in any bag but directly in the box.
-
Since inventories are built by hand, mistakes can happen. If you spot anything wrong, please contact us so we can review and correct it.
Report an issue
Let us know what seems wrong with this bag inventory.
PDF format
Choose a layout for your PDF export.
Generating PDF
The inventory PDF for this bag is being generated. This may take a few seconds.