Island Adventures
Set inventory
This set does not have numbered bags in the building instructions. The full set inventory is shown below without a per-bag split.
All bags
Bracket 1 x 2 - 1 x 2 Inverted
Brick, Modified 1 x 1 with Stud on Side
Plate 1 x 1
Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends
Plate, Modified 1 x 2 with Clip with Center Cut on Top
Plate, Modified 1 x 4 with 2 Studs without Groove
Plate, Round Corner 2 x 6 Double
Technic, Pin with Short Friction Ridges
Tile 1 x 3
Plate, Modified 1 x 1 with Tooth Horizontal
Technic, Axle 1L with Pin with Friction Ridges
Technic, Pin 3L with Friction Ridges
Cylinder 4 x 4 x 1 2/3 with Pin Holes and Center Bar
Plate 1 x 2
Slope 33 3 x 2
Slope 33 3 x 3 Double Convex Corner
Slope 33 3 x 4
Slope 45 2 x 2
Slope, Curved 2 x 2 x 2/3
Wedge 8 x 3 x 2 Open Left
Wedge 8 x 3 x 2 Open Right
Brick, Round 1 x 1
Minifigure, Utensil Pickaxe
Minifigure, Utensil Shovel / Spade - Handle with Round End
Minifigure, Visor Goggles
Plate 2 x 3
Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Plate, Modified 2 x 3 with Hole
Plate, Round 1 x 1
Slope 30 1 x 2 x 2/3 with 2 Gauges and Silver Outline Pattern
Technic, Brick 1 x 2 with Hole
Minifigure, Hair Short Tousled with Side Part
Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)
Arch 1 x 3 x 2 Curved Top
Slope, Curved 2 x 1 x 2/3
Antenna 4H - Flat Top
Bracket 1 x 2 - 1 x 4 with Rounded Corners
Plate 1 x 4
Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)
Technic Bush 1/2 Smooth
Technic, Axle 3L
Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
Technic, Disk 3 x 3
Technic, Plate Rotor 3 Blade with Smooth Ends and 6 Studs (Propeller)
Tile, Modified 1 x 2 Grille with Bottom Groove
Brick, Modified 1 x 1 with Studs on 4 Sides
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
Slope, Curved 2 x 1 x 2/3
Plate 2 x 4
Plate, Round Corner 4 x 4
Fish
Antenna Small Base with Black Lever (4592 / 4593)
Bracket 3 x 2 x 1 1/3 with Bottom Tube
Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite
Brick, Round 2 x 2 Dome Top
Minifigure, Utensil Cup
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Solid Bottom Tube
Slope 30 1 x 1 x 2/3
Technic, Axle 2L Notched
Tile, Modified 1 x 2 with Bar Handle
Torso Plaid Flannel Shirt with Collar and 5 Buttons Pattern / Red Arms / Yellow Hands
Minifigure, Headgear Cap, Aviator
Plate 1 x 3
Plate 1 x 8
Plate 4 x 4
Technic, Axle 5L with Stop
Technic, Axle and Pin Connector Angled #3 - 157.5 degrees
Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
Wedge, Plate 2 x 4
Hips and Legs Plain
Plate 1 x 10
Plate 2 x 2
Plate 2 x 4
Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)
Plate, Round Corner 4 x 4
Technic, Brick 1 x 4 with Holes
Tile 2 x 2 with Map Blue Water, Yellow Land, Black Pirate Ship, Compass Rose, White Skeleton Head and Red 'X' Pattern
Brick 1 x 2 without Bottom Tube
Brick, Round 1 x 1
Windscreen 3 x 6 x 1 Curved
Minifigure, Utensil Bottle
Plate, Round 1 x 1
Slope 30 1 x 1 x 2/3
Tile, Round 1 x 1
Plate, Round 1 x 1
Bracket 1 x 2 - 1 x 2
Brick 1 x 1
Brick 1 x 2
Brick 1 x 6
Plate 1 x 12
Plate 2 x 2
Plate 2 x 6
Slope 30 1 x 1 x 2/3
Slope 45 2 x 1
Slope 45 2 x 2
Slope 65 2 x 1 x 2
Slope, Curved 4 x 2
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Technic, Brick 1 x 2 with Axle Hole
Tile 1 x 8
Wedge 4 x 2 Left
Wedge 4 x 2 Right
Wedge, Plate 2 x 4
Wedge, Plate 3 x 2 Left
Wedge, Plate 3 x 2 Right
Brick 1 x 1
Brick 1 x 2 x 2 with Inside Stud Holder
Brick 1 x 4
Brick 1 x 6
Brick 2 x 4
Brick, Modified 1 x 2 with Grille / Fluted Profile
Minifigure, Head Dual Sided Brown Thick Eyebrows, Curly Moustache, Smirk / Thick Moustache, Bushy Beard Pattern
Plate 1 x 2
Plate 1 x 6
Plate, Modified 1 x 1 with Tooth Vertical
Plate, Modified 1 x 2 with Bar Handle on End
Slope 30 1 x 2 x 2/3
Slope 45 2 x 1
Slope, Curved 1 x 4 x 1 1/3
Slope, Curved 4 x 2
Slope, Curved 6 x 1 Inverted
Slope, Inverted 33 3 x 1
Technic, Brick 1 x 1 with Hole
Technic, Brick 1 x 2 with Axle Hole
Technic, Brick 1 x 4 with Holes
Tile 1 x 4
Tile 2 x 2
Frequently asked questions
-
This bag inventory was built by following the official LEGO building instructions step by step. At every step, we recorded which pieces were used and which numbered bag they came from, resulting in a complete parts list per bag.
-
Each numbered bag contains a specific subset of the set's total parts. By selecting a bag above, you can see every piece it includes — with part images, color details, and exact quantities.
-
Click on a bag, then use the export buttons in the toolbar. You can download a PDF for easy reference, or a BSX file — a BrickLink-compatible XML format you can import into tools like BrickStore.
-
We use bag 0 to list all parts that are outside of numbered bags, such as sticker sheets or some larger parts that are often not in any bag but directly in the box.
-
Since inventories are built by hand, mistakes can happen. If you spot anything wrong, please contact us so we can review and correct it.
Report an issue
Let us know what seems wrong with this bag inventory.
PDF format
Choose a layout for your PDF export.
Generating PDF
The inventory PDF for this bag is being generated. This may take a few seconds.