Harley-Davidson Fat Boy
Thanks to Matt.in.Alba, Skogbit, Andrea Gebhard, FleurAFM, Jan, Otter, TOM ARMSTRONG, Briqxel, Pieter-Jan Focke, Julien Mahin, BitterBricker for helping identify parts
Bag inventory
1
Arch 1 x 4
Bar 4L (Lightsaber Blade / Wand)
Brick 1 x 2
Hinge Plate 1 x 4 Swivel (2429 / 2430)
Plate 1 x 1
Plate 1 x 2
Plate 1 x 3
Plate 1 x 4
Plate 1 x 6
Plate 2 x 2
Plate 4 x 6
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)
Plate, Modified 1 x 2 with Bar Handle on End
Plate, Modified 1 x 2 with Clip with Center Cut on Top
Plate, Modified 1 x 2 with Pin Hole on Top
Plate, Round 1 x 1
Plate, Round 4 x 4 with 2 x 2 Round Open Center
Slope 18 2 x 1 x 2/3 with Grille
Slope 30 1 x 2 x 2/3
Slope 45 2 x 1 with 2/3 Cutout
Slope 45 2 x 3
Slope, Curved 2 x 2 x 2/3 Inverted
Slope, Curved 4 x 1
Slope, Inverted 45 4 x 1 Double
Technic, Axle 2L with Pin with Friction Ridges
Technic, Axle and Pin Connector Hub with 2 Perpendicular Axles
Technic, Axle and Pin Connector Toggle Joint Smooth
Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
Technic, Axle Connector Perpendicular 2 x 5 Bent
Technic, Brick 1 x 12 with Holes
Technic, Brick 1 x 16 with Holes
Technic, Brick 1 x 4 with Holes
Technic, Brick 1 x 6 with Holes
Technic, Brick 5 x 5 Right Angle (1 x 4 - 1 x 4)
Technic, Liftarm Thick 1 x 2
Technic, Liftarm Thick 1 x 3
Technic, Pin 3L with Friction Ridges and Stop Bush
Technic, Pin Connector 3L with 2 Pins and Center Hole
Technic, Pin Connector Perpendicular Double 3L
Technic, Pin with Short Friction Ridges
Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole
Window 1 x 4 x 3 - No Shutter Tabs
Technic, Axle 1L with Pin with Friction Ridges
Technic, Pin 1/2 without Friction Ridges
Technic, Pin 3L with Friction Ridges
Brick, Modified 1 x 2 with Pins
Plate, Modified 1 x 2 with Tow Ball on End
Technic, Axle 1L with Pin 2L with Friction Ridges
Technic, Axle 4L with Stop
Technic, Gear 24 Tooth with 1 Axle Hole
Technic, Gear 8 Tooth with Dual Face
Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top
Technic, Axle 3L with Stud
Antenna 4H - Flat Top
Bracket 1 x 2 - 1 x 2 Inverted
Brick, Round 1 x 1
Plate 1 x 2
Plate 1 x 3
Plate 1 x 4
Plate 2 x 2 Corner
Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Plate, Modified 1 x 2 with Pin Hole on Bottom
Plate, Modified 1 x 2 with Small Tow Ball Socket on Side
Plate, Modified 1 x 4 with Bar Arm Down
Plate, Modified 4 x 4 with 2 x 2 Open Center
Plate, Round 1 x 2 with Open Studs
Plate, Round 2 x 2 with Axle Hole
Slope 30 1 x 1 x 2/3
Slope 30 1 x 2 x 2/3
String Reel 2 x 2 x 1 Drum with Axle Hole
Technic Bush
Technic Engine Crankshaft
Technic, Axle 3L
Technic, Brick 1 x 1 with Hole
Technic, Brick 1 x 2 with Holes
Technic, Disk 3 x 3
Technic, Gear 16 Tooth - Axle Hole with Closed Sides
Technic, Gear 28 Tooth Double Bevel
Technic, Liftarm Thin 1 x 3 - Axle Holes
Technic, Pin 3L with Friction Ridges and Center Pin Hole
Technic, Pin without Friction Ridges
Tile 1 x 3
Tile 2 x 2
Tile, Round 2 x 2 with Bottom Stud Holder
Wedge 4 x 4 x 2/3 Triple Curved
Wedge, Plate 2 x 2 Cut Corner
Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)
Plate, Round 1 x 1 with Open Stud
Technic, Axle 1L with Pin 2L with Friction Ridges
Technic, Axle 2L Notched
Technic, Axle 4L
Technic, Liftarm Thick 1 x 3
Technic, Liftarm Thick 1 x 5
Technic, Axle 3L with Stop
Technic, Axle 5L with Stop
Technic, Pin 3/4
Plate 1 x 2
Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)
Slope 30 1 x 1 x 2/3
Technic Bush 1/2 Smooth
Technic, Liftarm Thick 1 x 7
Technic, Liftarm Thin 1 x 5
Frequently asked questions
-
This bag inventory was built by following the official LEGO building instructions step by step. At every step, we recorded which pieces were used and which numbered bag they came from, resulting in a complete parts list per bag.
-
Each numbered bag contains a specific subset of the set's total parts. By selecting a bag above, you can see every piece it includes — with part images, color details, and exact quantities.
-
Click on a bag, then use the export buttons in the toolbar. You can download a PDF for easy reference, or a BSX file — a BrickLink-compatible XML format you can import into tools like BrickStore.
-
We use bag 0 to list all parts that are outside of numbered bags, such as sticker sheets or some larger parts that are often not in any bag but directly in the box.
-
Since inventories are built by hand, mistakes can happen. If you spot anything wrong, please contact us so we can review and correct it.
Report an issue
Let us know what seems wrong with this bag inventory.
PDF format
Choose a layout for your PDF export.
Generating PDF
The inventory PDF for this bag is being generated. This may take a few seconds.