Ferrari F40
Thanks to Gerry, Orange_Puzzler, Alex, Nicholas Gruendl, Paul Higgins, Margaret, Dewey Brix, WB, Sabrina, Julien Mahin, Ben Bigelow, trainphreak, Skogbit, BitterBricker, Otter for helping identify parts
Bag inventory
1
Antenna Small Base with Black Lever (4592 / 4593)
Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side
Bracket 1 x 2 - 1 x 2
Bracket 1 x 2 - 2 x 2 Inverted
Brick 1 x 2 x 2 with Inside Stud Holder
Brick 1 x 4
Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends with Slots
Minifigure, Utensil Tool Spanner Wrench / Screwdriver
Minifigure, Weapon Lightsaber Hilt Straight
Plate 1 x 1
Plate 1 x 2
Plate 1 x 4
Plate 1 x 8
Plate 2 x 2
Plate 2 x 3
Plate 2 x 4
Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)
Plate, Modified 1 x 2 with Bar Handle on End
Slope 30 1 x 1 x 2/3
Slope 30 1 x 2 x 2/3
Slope 33 3 x 1
Slope, Curved 2 x 2 x 2/3
Slope, Curved, Inverted 4 x 1
Technic, Axle 10L
Technic, Brick 1 x 12 with Holes
Technic, Brick 1 x 2 with Axle Hole
Technic, Brick 4 x 6 Open Center
Technic, Pin with Short Friction Ridges
Technic, Steering Wheel Small, 3 Studs Diameter
Tile 1 x 4
Tile 1 x 6
Tile 2 x 2
Wedge, Plate 3 x 2 Left
Wedge, Plate 3 x 2 Right
Technic, Axle 1L with Pin with Friction Ridges
Technic, Pin 3L with Friction Ridges
Arch 1 x 3 x 2 Curved Top
Bracket 1 x 2 - 1 x 2 Inverted
Brick 1 x 1
Brick 1 x 2
Brick 1 x 4
Brick 2 x 2 Corner
Brick, Modified 1 x 1 with Headlight
Brick, Modified 1 x 2 with Pin
Brick, Modified 2 x 2 with Pin and Axle Hole
Brick, Round 2 x 2 with Axle Hole
Plate 1 x 1
Plate 1 x 10
Plate 1 x 2
Plate 1 x 3
Plate 1 x 6
Plate 2 x 10
Plate 2 x 2
Plate 2 x 2 Corner
Plate 2 x 6
Plate 4 x 12
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Plate, Modified 1 x 2 with Bar Handle on End
Plate, Modified 1 x 2 with Pin Hole on Top
Plate, Modified 1 x 4 Offset
Plate, Modified 1 x 4 with 2 Studs without Groove
Plate, Round 2 x 2 with Axle Hole
Slope 30 1 x 2 x 2/3
Slope 65 2 x 1 x 2
Slope, Curved 2 x 1 x 2/3
Slope, Curved 2 x 2 x 2/3
Slope, Inverted 45 2 x 1
Technic, Axle 4L with Stop
Technic, Brick 1 x 14 with Holes
Technic, Brick 1 x 4 with Holes
Technic, Brick Modified 1 x 2 with Hole and Dual Liftarm Extensions
Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top
Tile 1 x 1
Tile 1 x 2
Tile 1 x 6
Tile 2 x 4
Tile, Modified 1 x 1 with Open O Clip
Tile, Modified 4 x 4 with Studs on Edge
Tile, Round 2 x 2 with Hole
Wedge, Plate 3 x 3 Cut Corner
Tile, Round 1 x 1
Tile, Round 1 x 1 with Black Gauge with Red Pointer and Green, Yellow, and Red Tick Marks Pattern
Brick, Round 1 x 1
Bar 4L (Lightsaber Blade / Wand)
Bracket 5 x 2 x 1 1/3 with 2 Holes and Bottom Tube
Brick, Modified 1 x 1 with Stud on Side
Brick, Modified 1 x 2 with Pins
Hinge Plate 2 x 2 Locking with 1 Finger on Top
Plate, Modified 1 x 2 with Clip with Center Cut on Top
Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side - Solid Bottom Tube
Technic, Axle 9L
Technic, Axle and Pin Connector Perpendicular 3L with 2 Pin Holes
Technic, Axle and Pin Connector Perpendicular Double Split
Technic, Brick 1 x 10 with Holes
Technic, Liftarm Thick 1 x 2 - Axle Hole
Technic, Pin 1/2 without Friction Ridges
Bar 6L with Stop Ring
Bracket 1 x 2 - 1 x 2 Inverted
Bracket 1 x 2 - 2 x 2
Bracket 1 x 2 - 2 x 2 Inverted
Brick 1 x 1
Brick 1 x 2
Brick 1 x 6
Brick 2 x 2 Corner
Brick, Modified 1 x 1 with Bar Handle
Brick, Modified 1 x 2 with Studs on 1 Side
Plate 1 x 1
Plate 1 x 10
Plate 1 x 2
Plate 1 x 3
Plate 1 x 6
Plate 2 x 2
Plate 2 x 2 Corner
Plate 2 x 3
Plate, Modified 1 x 1 with Light Attachment - Thick Ring
Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)
Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)
Plate, Modified 1 x 2 with Door Rail
Slope 18 4 x 1
Slope 30 1 x 2 x 2/3
Slope, Curved 2 x 1 x 2/3
Slope, Curved 2 x 2 x 2/3
Slope, Curved 3 x 1
Slope, Curved, Inverted 4 x 1
Technic, Axle 2L Notched
Technic, Brick 1 x 1 with Hole
Technic, Liftarm Thick 1 x 7
Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5
Technic, Pin 3L with Friction Ridges and Stop Bush
Tile 1 x 1
Tile 1 x 2
Tile 1 x 3
Tile 1 x 6
Tile 1 x 8
Tile 2 x 2
Tile 2 x 2 Corner
Tile 2 x 4
Vehicle, Mudguard 2 x 4 with Flared Wings
Wedge, Plate 2 x 4
Plate 1 x 2
Windscreen 1 x 12 x 4 Tapered with Red Stripe on Both Ends Pattern
Brick 1 x 2
Technic, Liftarm Thin 1 x 3 - Axle Holes
Tile, Modified 1 x 2 Grille with Bottom Groove
Plate 1 x 1
Technic, Liftarm, Modified Bent Thick L-Shape 2 x 4
Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5
Frequently asked questions
-
This bag inventory was built by following the official LEGO building instructions step by step. At every step, we recorded which pieces were used and which numbered bag they came from, resulting in a complete parts list per bag.
-
Each numbered bag contains a specific subset of the set's total parts. By selecting a bag above, you can see every piece it includes — with part images, color details, and exact quantities.
-
Click on a bag, then use the export buttons in the toolbar. You can download a PDF for easy reference, or a BSX file — a BrickLink-compatible XML format you can import into tools like BrickStore.
-
We use bag 0 to list all parts that are outside of numbered bags, such as sticker sheets or some larger parts that are often not in any bag but directly in the box.
-
Since inventories are built by hand, mistakes can happen. If you spot anything wrong, please contact us so we can review and correct it.
Report an issue
Let us know what seems wrong with this bag inventory.
PDF format
Choose a layout for your PDF export.
Generating PDF
The inventory PDF for this bag is being generated. This may take a few seconds.