Pet Shop
Thanks to Zoé Cassiopée, Otter, BitterBricker, Succulentus, Matt.in.Alba, Robert Heikkilä, Twipped, Philip Howard, BrickworkStudio, FlickBrick240, Eric van Gaal, Julien Mahin, Skogbit, Fidel Ruiz, oprypin, Olliver, Arran Millett, Nicholas Gruendl, Andrea Gebhard, Jason Smith, vystoria, Dewey Brix, gliu for helping identify parts
Bag inventory
1
Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side
Brick 1 x 1
Door 1 x 4 x 6 with 4 Panes and Stud Handle
Fence 1 x 4 x 2 Spindled with 2 Studs
Hose, Rigid 3mm D. 9L / 7.2cm
Leg Skeleton
Minifigure, Weapon Lightsaber Hilt Straight
Plate 1 x 1
Plate 1 x 2
Plate 1 x 6
Plate, Modified 1 x 2 with Bar Handle on End
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
Plate, Modified 2 x 3 with Hole
Plate, Round 1 x 1
Plate, Round 2 x 2 with Axle Hole
Slope 30 1 x 1 x 2/3
Slope 33 3 x 3 Double Convex Corner
Slope, Curved 1 x 4 x 1 1/3
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
Technic, Brick 1 x 2 with Hole
Technic, Pin with Short Friction Ridges
Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole
Tile 1 x 4
Tile, Modified 1 x 1 with Clip
Window 4 x 4 x 3 Roof with Bottom Panel
Minifigure, Headgear Cap - Short Curved Bill
Plate, Round 1 x 1 with Flower Edge (4 Knobs / Petals)
Plate, Round 1 x 1 with Flower Edge (4 Knobs / Petals)
Brick 1 x 10
Brick 2 x 3
Brick 2 x 4
Brick, Modified 1 x 2 with Log Profile
Brick, Round 1 x 1
Container, Trash Can with 4 Cover Holders
Dish 2 x 2 Inverted (Radar)
Door 1 x 2 x 3 with Vertical Handle, Mold for Tabless Frames
Plate 1 x 4
Plate 2 x 3
Plate 2 x 4
Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
Slope 45 2 x 1
Slope 45 2 x 1 with 2/3 Cutout
Technic, Pin 3/4
Tile 1 x 1
Tile 1 x 2
Tile 2 x 2
Tile 1 x 2
Hips and Legs Plain
Brick 2 x 4
Plate 1 x 2
Plate 8 x 8
Plate, Modified 4 x 6 with Trap Door Hinge (Long Pins)
Plate, Modified 6 x 8 Trap Door Frame Horizontal (Long Pin Holders)
Baseplate 16 x 32
Door 1 x 4 x 6 with 4 Panes and Stud Handle
Plant Flower Stem with Stud and 3 Stems
Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side
Bar 1L with Top Stud and 2 Side Studs (Connector Perpendicular)
Bar 6L with Stop Ring
Brick 1 x 3
Brick 1 x 6
Brick 2 x 2 Corner
Brick 2 x 4
Brick, Modified 1 x 1 with Bar Handle
Brick, Modified 1 x 1 with Stud on Side
Brick, Modified 1 x 2 with Log Profile
Cone 1 x 1
Hinge Plate 1 x 4 Swivel (2429 / 2430)
Ladder 1 1/2 x 2 x 2
Panel 1 x 1 x 1 Corner
Panel 1 x 4 x 1
Plate 1 x 1
Plate 1 x 2
Plate 1 x 3
Plate 1 x 4
Plate 1 x 6
Plate 1 x 8
Plate 2 x 6
Plate, Modified 1 x 1 with U Clip Thick (Vertical Grip)
Plate, Round 1 x 1
Slope, Inverted 45 2 x 2 with Flat Bottom Pin
Technic, Brick 1 x 1 with Hole
Tile 1 x 2
Tile 1 x 3
Tile 1 x 4
Tile 1 x 6
Tile 2 x 4
Plate, Round 1 x 1
Plate 1 x 1
Plate 1 x 4
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
Tile 2 x 2
Tile, Modified 1 x 2 Grille with Bottom Groove
Container, Box 2 x 2 x 2
Container, Box 2 x 2 x 2 Door with Slot
Minifigure, Utensil Cup
Slope 30 1 x 1 x 2/3
Torso Castle Kingdoms Female Corset with Gold Panel Front and Lace Up Back Pattern / Dark Red Arms / Yellow Hands
Brick 1 x 1
Brick 1 x 2
Brick 1 x 4
Brick 1 x 6
Brick 1 x 8
Brick 2 x 2 Corner
Brick, Modified 1 x 1 with Bar Handle
Brick, Modified 1 x 1 with Headlight
Minifigure, Hair Female Mid-Length with Part over Right Shoulder
Plate 1 x 2
Plate 1 x 3
Plate 1 x 6
Plate 1 x 8
Tile 1 x 1
Glass for Window 1 x 2 x 3 Flat Front
Minifigure, Head (Plain)
Brick 1 x 2 without Bottom Tube
Arch 1 x 3 x 2 with Curved End
Brick 1 x 1
Brick 1 x 6
Brick 1 x 8
Brick, Modified 1 x 1 with Headlight
Brick, Round Corner 3 x 3 x 2 Dome Top
Door, Frame 1 x 4 x 6 with 2 Holes on Top and Bottom
Minifigure, Utensil Flotation Ring (Life Preserver)
Minifigure, Utensil Saucepan
Minifigure, Utensil Ski with Hinge
Panel 1 x 4 x 3 - Hollow Studs
Plate 1 x 1
Plate, Modified 1 x 4 with 2 Studs without Groove
Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud
Tile 1 x 1
Tile 1 x 2
Tile 1 x 2 with Blue Lines and Red Square Pattern (Mail Envelope with Stamp)
Tile 1 x 3
Tile 1 x 6
Window 1 x 2 x 3 Flat Front
Minifigure, Head Standard Grin Pattern
Plant Flower Small, 4 on Sprue
Frequently asked questions
-
This bag inventory was built by following the official LEGO building instructions step by step. At every step, we recorded which pieces were used and which numbered bag they came from, resulting in a complete parts list per bag.
-
Each numbered bag contains a specific subset of the set's total parts. By selecting a bag above, you can see every piece it includes — with part images, color details, and exact quantities.
-
Click on a bag, then use the export buttons in the toolbar. You can download a PDF for easy reference, or a BSX file — a BrickLink-compatible XML format you can import into tools like BrickStore.
-
We use bag 0 to list all parts that are outside of numbered bags, such as sticker sheets or some larger parts that are often not in any bag but directly in the box.
-
Since inventories are built by hand, mistakes can happen. If you spot anything wrong, please contact us so we can review and correct it.
Report an issue
Let us know what seems wrong with this bag inventory.
PDF format
Choose a layout for your PDF export.
Generating PDF
The inventory PDF for this bag is being generated. This may take a few seconds.